bluetooth - android hciattach bcm43xx bd_address -

-

I'm trying to get my BCM 43xx chip on running on my Galaxy Note 2 KitKat.

I have my Bluetooth subsystem backed up and changed to Bluedroid (which I have migrated in my ROM) from hub to hciattach, hciconfig, and others

A reboot I run The following 

  Modprobe bluetooth // Backupported subsystem Moderadob load hci_uart modprobe hci_smd "1" & gt; Repeat / Sys / Class / rfkill / rfkill0 / state hciattach / dev / ttySAC0 3000000 flow 79 BCM43xx: 59: 5E: **: **: ** // bt is loaded with addr / EFS / Bluetooth / bt_addr in which * * The actual hex hciconfig is hci0

Anyway I have modded the hciattach as I find it difficult to find my Bcm4334.hcd firmware file in which my ROM / system / bin is hard-coded It was going to be in the source and everyone feels like I get 

  in '/ system / bin': '/ system / bin' success: '/ system / bin /.ext 'in Saf Crack: Break in Success '/system/bin/.ext': Success Flash Firmware /system/bin/bcm4334_semcosh.hcd Set Controller 3000000 bit / Device Setup for UART Speed ​​Complete

Where the first 4 lines are my debug codes which are to get the function to find the repeatedly. I

However, this works .. no ... I can use the tools in the shell to ping , Scan, etc., but see my HCICFig - A 

  hci0: type: BR / EDR bus: UA RT BD Address: 43: 34: B0: 00: 00: 00 ACL MTU: 1021: 8 SCO MTU: 64: 1 RX Bytes below: 579 ACL: 0 SCO: 0 Events: 27 Errors: 0 TX Bytes: 379 ACL: 0 SCO: 0 Orders: 27 Errors: 0 Features: 0xbf 0xFE 0xcf 0xFE 0xdb 0xff 0x7b 0x87 Packet Type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link Policy: RSWITCH Sniff Link Mode: DOS  Accept

Look at my BD address, its default, no address given address. The issue that I am facing now is to blues my hardware address. Check that and see it does not match, so it does not fail to start.

I am getting a place where I do not know any help would be great

I am using the blues 5.18, backported 3.14 driver, 4.4.2 base.

Thanks in advance


Comments

Post a Comment

Popular posts from this blog

Editing Python Class in Shell and SQLAlchemy -

-
I am working on the terminal on a shell script after this tutorial SQLAlchemy tutorial. I need to type gt; & Gt; & Gt; Sqlalchemy import column, integer, string & gt; & Gt; & Gt; Class user (base): __tablename__ = 'users' id = column (integer, primary_key = true) name = column (string) absolute name = column (string) password = column (string) def __repr __ (self): return "& lt ; User (name = '% s', absolute name = '% s', password = '% s') & gt; "% (Self.name, self.fullname, self.password) After the problem I have typed the password = column (string) I hit twice and changed .... >> I then took everything back but then an error was thrown because the class already exists ... I am not completely sure how to fix it. How do I open that slip in the shell script and edit it (Add DF to DRR) The error thrown below: / user / giripeters / TFSQLLX / Lib / python2.7 / site-packages / sqlalchemy / ext / decla...
Read more

import - Python ImportError: No module named wmi -

-
I followed the instructions for downloading WMI for Python When I try to run the code for C.Win32_Service (StartMode = "Auto", state = "Stopped") import wmi c = wmi.WMI (): if Raw_input ("restart% s?"% S.Caption) .upper () == "Y": s.StartService () I got the error traceback (most recent call end): file ". \", Line 1, edit: I am using Python 2.7.6 EDIT2: I am running 64-bit Windows 2008 R2, and I've downloaded WMI-1.4.9.zip (md5). I removed the content and put it in D: Python \ Tools \ Scripts I executed dragon setup.py.install I said D : \ Python \ tools \ scripts to% PATH% and when I execute the code for C.Win32_Service (StartMode = "Auto", state = "Stopped") import wmi c = Wmi.WMI (): If raw_input ("Restart% s?"% S. Caption). () == "Y": s.StartService () error me Gets traceback (most recent call final): File ". See \", line 1, & lt; Modu...
Read more

uislider - In a MATLAB GUI, how does one implement a continuously varying slider from a GUIDE created .m file? -

-
I am trying to create a GUI with a plot and a slider. The slider should be described as continuously and output. I have a problem with this explanation that the uicontrol object is programmatically created, on the contrary, I want to know that in the last three instances, to complete the same thing done according to the program What can be added to a GUI file that is created. The code is down, and I have marked the (wrong) code that is provided by some of the above examples. Thanks a lot for any help! This slider function sets P1_slider_Callback (hObject, eventdata, handle) (handle, dragon, 'string', num2str (get (hObject, 'value'), 3)) PlottheData_Callback ( HOBject, EventData, Handle)% "PlotHeadata" is a button that creates the data slider based on the value of P1_slider%, and I think that here "p1_slider_CreateFcn" (hObject, eventdata, handle) needs to be assembled (HOBJECT, 'BackgroundRoller'), (0, 'Default UITTACKBACK MANDROLLE...
Read more